3-CONTROLSANDINSTRUMENTS
Placingthebackhoeinthestowedposition(hydraulically,ifequipped)
1.Startthemachine.
2.PlacethedirectioncontrolleverinNEUTRALposition.
3.Ifapplicable,placegearshiftcontrolleverintheNEU-
TRALposition.
4.Turntheseatintothebackhoeoperationposition.
5.Lowerthestabilizerstothegroundsothatthereartires
arejustofftheground.
6.Ifapplicable,fullyretracttheextendabledipper.
7.Ifapplicable,removetheextendabledipperlockpin
fromthestorageposition(2)andplaceitinthelock
position(1).
8.Rollthedipperarmandattachmentinwardtowardsthe
boom.
RAIL15TLB0545BA6
3-70
To Next Page
Loading...
