New Holland B95C - Backhoe Attachment Mechanical Controls Version

3-CONTROLSANDINSTRUMENTS
Backhoeattachmentmechanicalcontrolsversion
Stabilizermechanicalcontrols
WARNING
Unexpectedmachinemovement!
Beforeyouusethebackhoeattachment,makesurethatthemachineisrestingonthestabilizers.
Failuretocomplycouldresultindeathorseriousinjury.
W1326A
Left-handstabilizercontrollever
Thislever(A)hasthreepositions:
Position“0”:Neutral.Thispositionstopsthemovementof
theleft-handstabilizer.Assoonastheleverisreleased,
itautomaticallyreturnstotheneutralposition“0”andthe
left-handstabilizerstopsraisingorlowering.
Position“1”:Theleft-handstabilizerlowers.
Position“2”:Theleft-handstabilizerrises.
Right-handstabilizercontrollever
Thislever(B)hasthreepositions:
Position“0”:Neutral.Thispositionstopsthemovementof
theright-handstabilizer.Assoonastheleverisreleased,
itautomaticallyreturnstotheneutralposition“0”andthe
right-handstabilizerstopsraisingorlowering.
Position“1”:Theright-handstabilizerlowers.
Position“2”:Theright-handstabilizerrises.
NOTE:Toraiseorlowerthetwostabilizersatthesame
time,operatethetwoleverssimultaneously.
NOTICE:Beforemachinetravelorbeforeusingthe
loaderattachment,makesurethestabilizersarecom-
pletelyraised.
LEEN12T0556AA1
Backhoemechanicalcontrolcongurations
Thesecontrolleversareusedtooperatethebackhoeat-
tachment.Thespeedofmovementofeachcontrolde-
pendsontheangletowhichtheleveristilted.Inthein-
termediateposition,twomovementscanbeobtainedsi-
multaneously.
Fourbackhoeattachmentcontrolcongurationsexist,
dependingonthecountryconcerned:
•
Standardconguration
•
ISOconguration
•
Fourleverpatternconguration
•
Cross-patternconguration
Theoperatingpatternofthecontrolleversisdifferent.
Checkwhichcongurationyouhaveonyourmachine.
3-73