New Rock Technologies MX8A Series - Page 47

HX4E/MX8A Series Voice Gateway User Manual
New Rock Technologies, Inc. 47
Digit map
Description
x.T
The gateways will detect any length of telephone number starting with any number
between 0-9.
The gateway terminates the process of receiving digits and sends detected numbers if
the duration of no dialing period exceeded the value of the Complete entry timer
parameter (in Basic > System. See Table 2-5).
x.#
If subscribers press # key after dial-up, the gateways will immediately terminate
receiving digits and send all the numbers before # key.
*xx
Terminate after receiving * and any two-digit number. *xx is primarily used to
activate function keys for supplementary services, such as CRBT, Call Transfer, Do
not Disturb, etc.
#xx
Terminate after receiving * and any two-digit number. #xx is primarily used to stop
function keys for supplementary services, such as CRBT, Call Transfer, Do not
Disturb, etc.
[2-3,5-7]xxxxxxx
The gateway terminates receiving digits after receiving eight digits starting with any
digits except 1, 4, or 9.
02xxxxxxxxx
The gateway terminates receiving digits after receiving 11 digits starting with 2.
013xxxxxxxxx
The gateway terminates receiving digits after receiving 12 digits starting with 013.
13xxxxxxxxx
The gateway terminates receiving digits after receiving 11 digits starting with 13.
11x
The gateway terminates receiving digits after receiving three digits starting with 11.
9xxxx
The gateway terminates receiving digits after receiving five digits starting with 9.
17911 (e.g.)
Send away when the set number, like 17911, is received.
Dial rules by default as follows:
01[3-5,7,8]xxxxxxxxx
010xxxxxxxx
02xxxxxxxxx
0[3-9]xxxxxxxxxx
120
11[0,2-9]
111xx
123xx
95105xxx
95xxx
100xx
1[3-5,7,8]xxxxxxxxx
[2-3,5-7]xxxxxxx
8[1-9]xxxxxx
80[1-9]xxxxx
800xxxxxxx
4[1-9]xxxxxx
40[1-9]xxxxx
400xxxxxxx
xxxxxxxxxx.T
x.#
#xx
*xx
##