HX4E/MX8A Series Voice Gateway User Manual
New Rock Technologies, Inc. 29
Handset Packag or Line Package
Select whether a wildcard with prefix is allowed when a gateway registers to the
proxy server. The default value is not allowed.
Partially allowed: gateways will use a wildcard with fixed prefix (e.g. aaln / *)
when registering. For example, when configuring telephone numbers, if line 1 is
set to aaln/1, line 2 is set to aaln/2 and line 3 is set to aaln/3, the gateways will
register to the call agent in aaln/* without the need of registering the lines
individually.
Allowed: the gateways will use a wildcard in registering without prefix.
Select whether CR is used as the end of line in the MGCP messages. Default
not selected.
Quarantine default to
loop
Select the Quarantine handle of gateways making a request to the outside, and
default not selected.
Selected: quarantine using loop mode, the gateways will continually notify all
events as requested after receiving a request.
Select the processing mode when there is no timeout parameter in the outside
request received by the gateways, and default not selected.
Selected: the gateways will report timeout in terms of its own timeout setting
(the time interval set in non-dial timeout of configuration system parameters)
when subscribers hasn’t dialed up in time after offhook.
Using configured digit
map
Select whether to activate the digit map configured by local gateway, and
default value is not selected.
Using notify instead of
401/402
Set whether the gateways report “offhook events” to replace 401 messages in
NTFY or report “onhook events” to replace 402 messages in NTFY when
responding to messages sent by the proxy server. Default: not selected.
Selected: the gateways will use NTFY messages to replace 401 and 402
messages.
No name in default
package
Select if a package name is included when the gateways reply to the default
package, and default not selected.
Keep connection when
on-hook
Select if the gateways actively cancel connection disconnect when subscribers
hook on, and default not selected.
2.3.8 FoIP
After login, click the label of Basic > FoIP to open this interface.
To Next Page
Loading...
Need help?
General
