User Manual HX4E/MX8A Series Voice Gateway
80 www.newrocktech.com
Figure 2-57 Interface for Completing Device Restart after Upgrade
The gateway is on the progress of reboot when the interface cannot be displayed.
Wait for about two minutes, and access the interface of gateway management system, click Info and
check the software version.
2.10.4 Restore Factory Settings
After login, click Tools > Restore factory settings to restore the factory settings.
The factory settings are designed based on common applications, and therefore, no need to modify them
in many deployment situations.
You can choose to restore network or telephony related factory settings, or both.
Restoration takes effect after the system is restarted.
Figure 2-58 Restore Factory Settings Interface
2.10.5 Capture Recordings on the Port
After login, click Tools > TDM capture to open this interface. This tool can be used to capture the voice
stream from the Phone or Line interface. When the call lasts longer than 200 seconds, only the first 200
seconds of voice stream will be captured. The voice file is stored on the gateway in PCMU format.
Figure 2-59 Interface for capturing Port Recordings
To Next Page
Loading...
