New Rock Technologies MX8A Series - Clock Service

HX4E/MX8A Series Voice Gateway User Manual
New Rock Technologies, Inc. 69
Name
Description
Do not disturb
Activate “Don't Disturb”, with default of *72. With DND selected, the gateway will
reject all coming calls by sending busy tone to the caller.
Note: It’s required to start “Don't Disturb” prior to using this function (please see the
instructions on relevant configuration of subscriber line).
Deactivate DND
The function key to cancel “Don't Disturb”, with default of #72. Dialing the function
key may recover normal ringing upon the arrival of incoming calls.
Speed dial
Define the function key of dial, with default of *74. This key allows the user to build
a table of 2-digits (20~49) speed-dial numbers.
Note: It’s necessary to get the dial-up service under way before applying this
function (please see Phone for how to assign the feature to the phone).
User operation: upon dialing the function key (*74), dial the two-digit speed dial
followed by the expanded number terminated with #.
To cancel the relationship, see the following descriptions.
Speed dial prefix
The prefix number for applying abbreviated dialing, with default of **. The said
prefix should be added ahead of abbreviated dialing numbers when using abbreviated
dialing.
User operation: off hook → dial the prefix number of abbreviated dialing (**) and
dial abbreviated dialing number (20).
Suspend call
waiting
The function key for cancelling the call waiting feature for next call, with default of
*64. Dialing this function key will temporarily shield the user from a call-waiting
distraction for next call, avoiding the possible intervention.
Note: The function key works only for single cancel, if to cancel the call waiting
completely, please refer to
the instructions on relevant configuration of subscriber line. “FXS-n” corresponds to
the “Line > FXS phone Number ID n”.
Blind call transfer
Function key of blind call transfer, with default of *38.
User operation: during the call, tap the phone hook switch or press R button→ dial
*38→ dial the called number and then hang up.
Audit CRBT
The function key for listening to the color ring, with default of *88.
User operation: off hook → press *88 → input color ring number.
During listening, you can press a two-digit CRBT index to change to another CRBT
file.
Three-way calling
The default value is *79.
2.7.13 Clock Service
After login, click the label of Advanced > System time to open this interface.