User Manual HX4E/MX8A Series Voice Gateway
68 www.newrocktech.com
The function key for determining the IP address of gateway, with a default of ##.
When this function key is dialed, you can hear the device IP address, the web port
number for accessing the device, the IP address of the gateway, the subnet mask, and
the system software version number.
Note: If the device has only the FXO port, you can use Finder, a tool developed by
New Rock, to obtain the IP address.
If you want to have a copy of Finder, please send an email to gs@newrocktech.com.
The function key for determining the phone number of this subscriber line, with
default of #00. By dialing this key, your will hear the phone number of the subscriber
line voiced by the gateway.
You can click to enable the service function key, or deselect the checkbox to
disable the service function key.
The function key for activating unconditional call forwarding, with a default of *60.
Dialing this key will activate unconditional call forward of the line and set the
destination number for call forwarding. User operation: off hook → press *60
→enter the destination number.
Users can determine the latest destination number set by dialing *60*.
Note: It’s required to enable call forwarding service before using this function
(please see the instructions on the relevant configuration of subscriber line).
The function key for deactivating unconditional call forwarding, with default of #60.
User operation: off hook → press #60 → hang up.
The function key for activating call forwarding on busy, with default of *61. Dialing
this key may activate CFB, and specify the destination number. It’s required to
enable call forwarding on busy service before using this function (please see the
instructions on relevant configuration of subscriber line).
The function key for deactivating call forwarding on busy, with default of #61. User
operation: off hook → press #61 → hang up.
User operation: off hook → press #61 → hang up.
The function key for activating call forwarding on no answer, with default of *62.
Dialing the function key should activate call forwarding on no answer and specify
destination number.
Note: It’s required to enable call forwarding on no answer service before using this
function (please see the instructions on relevant configuration of subscriber line).
The function key for deactivating call forwarding on no answer, with default of #62.
The function key for activating color ringback tone, with default of *80. Subscribers
may select their favorite color RB tone by using this key.
Note: It’s required to start color ring service before using this function (please see
Phone for how to assign the feature to the phone).
User operation: upon off hook, the subscriber may press the function key (e.g. *80),
then, input the two-digit index numbers of color ring; *80* is used for hearing and
inquiring the color ring that has been previously set.
The function key for deactivating the color ring, with default of #80. The subscriber
may use such key to recover the normal ring of phone.
User operation: off hook → press #80 → hang up.
The function key for activating the double-ring/forking feature, with default of *75.
The function key for deactivating the feature, with default of #75.
To Next Page
Loading...
