Need help?Do you have a question about the New Rock Technologies MX60E and is the answer not in the manual?
Overview of MX Series intelligent VoIP Gateways and their applications.
Details the various functions and features supported by MX gateways.
Procedures for obtaining IP addresses and logging into the gateway.
Steps to obtain the gateway's IP address via DHCP or static configuration.
Instructions for accessing the gateway's Web GUI and default login credentials.
Covers essential basic settings for the gateway.
Configure IP settings, DNS, and network interfaces.
Configure system-wide parameters like timers and codecs.
Configure Session Initiation Protocol (SIP) settings for VoIP.
Configure features for individual subscriber lines.
Configure features for individual trunk lines.
Define dialing rules to interpret and route dialed numbers effectively.
Configure routing rules for number transformation and call routing assignment.
Configure SIP messages, timers, and registration parameters.
Secure access by managing passwords and ports.
Specify allowed IP addresses for Web GUI or SSH access.
Implement measures to prevent unauthorized login attempts.
Configure Access Control Lists for traffic filtering.
Defend against DoS/DDoS attacks by limiting traffic rates.
Filter VoIP messages from untrusted network sources.
Configure SIP-allowed IP addresses to prevent toll fraud.
Upgrade gateway firmware using .img or .tar.gz files.
General| Protocols | SIP |
|---|---|
| Voice Codecs | G.711, G.729, G.723.1, G.726, iLBC |
| Fax | T.38, G.711 pass-through |
| Interfaces | FXS, FXO |
| Management | Web GUI, SNMP, TR-069 |
| Operating System | Linux |
| USB Ports | USB 2.0 |
| Power Supply | AC 100-240V, 50-60Hz |
| Operating Temperature | 0°C to 40°C |
| Dimensions | 35 mm |
To Next Page
