New Rock Technologies MX60E - Figure 2-55 Access Configuration Interface; Table 2-34 Access Security Setting Parameters

User Manual MX Series Voice Gateway
90 New Rock Technologies, Inc.
Figure 2-55 Access Configuration Interface
Table 2-34 Access security setting parameters
Name
Description
Change
administrator
/operator password
Set the administrator/operator password by entering the current password.
The password must meet the following requirements:
 8 to 16 characters
 At least two of the following: letters, numbers, and symbols
 Excluding&, =, and “
Please change the initial password at first time login.
Web
HTTP/HTTPS port
Set the HTTP/HTTPS port for the device. The default value is 80 for HTTP and 443 for
HTTPS.
HTTP/HTTPS port is use for:
 Web accessing (XML command interface)
 Auto Provisioning
Login time out
Set the login timeout interval, the default value is 600s.If you do not conduct any
operation within timeout interval, you will log out.