Need help?Do you have a question about the New Rock Technologies MX8A Series and is the answer not in the manual?
Explains how to obtain gateway IP address and log in to the configuration interface.
Details methods for obtaining the gateway's IP address via DHCP or static configuration.
Describes the process of entering the IP address and using the login interface.
Guides users to the Network configuration interface for IP settings.
Instructs on accessing the VLAN configuration interface for network segmentation.
Directs users to the SIP configuration interface for call signaling setup.
Describes configuring phone numbers for FXS ports.
Explains how to configure features for individual subscriber lines.
Describes configuring phone numbers for FXO ports.
Explains how to configure features for individual trunk lines.
Explains how to configure dialing rules for number interpretation and call routing.
Guides users to configure routing rules, including number transformation and destination.
Details how to configure security settings like Telnet, SSH, and Ping.
Explains how to restrict access to the device via IP addresses.
Explains SIP message structure and configuration for register server compatibility.
Explains how administrators can change passwords for themselves and operators.
Details the step-by-step process for upgrading the gateway's software.
Guides users to restore the device to its original factory default settings.
General| FXS Ports | 8 |
|---|---|
| Network Interface | 10/100/1000 Mbps Ethernet |
| Operating System | Embedded Linux |
| Ethernet Ports | 2 |
| Protocols | SIP |
| Voice Codecs | G.711A/μ, G.723.1, G.729A/B, iLBC |
| Fax | T.38, G.711 pass-through |
| Management | Web, SNMP, TR-069 |
| Wireless Connectivity | Not supported |
| USB Ports | 1 |
| Power Supply | AC 100-240V, 50-60Hz |
To Next Page
