User Manual HX4E/MX8A Series Voice Gateway
78 www.newrocktech.com
login.
For changing administrator password, it’s required to enter new password into Old password, New
password field and Repeat new password field, and then click Save.
The password being used by the operator will not be displayed, which could be changed by the
administrator at any time. The administrator is allowed to change the operator’s password by entering the
new password into Operator password > New password.
Figure 2-51 Password Change Interface
2.10.2 Configuration Management
After login, click Tools>Import data to open this interface.
The download procedure is similar to the download procedure of log files.
The steps for importing configuration files are the same as the Upgrade. The steps for exporting
configuration files are the same as the steps for Log Download.
Figure 2-52 Configuration Management Interface
2.10.3 Upgrade
After login, click Tools > Software upgrade to open this interface. The software upgrade procedure is
presented as below:
Step 1 Obtain the upgrade files (tar.gz file), and save the file onto a local computer.
Step 2 Click
Tools
>
Software upgrade
to access to the page of software upgrade.
To Next Page
Loading...
