New Rock Technologies MX60E - Advanced Configuration; System Configuration (NAT, Auto Provisioning)

MX Series Voice Gateway User Manual
New Rock Technologies, Inc. 71
Routing Setting
Description
FXS[1] 0 ROUTE NONE
A calling starting with 0 is barred from dialing using the phone set at FXS1 port
FXS[1-2] 00 ROUTE NONE
A calling starting with 00 is barred from dialing using the phone set at FXS1 to
FXS2 port.
International call is not allowed.
FXS CPN2 ROUTE NONE
The telephone whose calling number starts with 2 at an FXS port is not allowed
to make calls.
Trunk Group for Outbound Calls
An outbound trunk group consists of a set of trunks which are used for outbound calling following certain
rules. Here is an example of routing all outbound calls from FXS port to the trunk group consisting of
ports FXO1 to FXO4 in sequential fashion:
FXS x ROUTE FXO 1-4
Further, we set up the trunk group such that it is used only by calls to destinations with prefix 6120:
FXS 6120 ROUTE FXO 1-4
2.6 Advanced Configuration
2.6.1 System
After login, click Advanced > System to open this interface.