New Rock Technologies MX8A Series - Page 64

User Manual HX4E/MX8A Series Voice Gateway
64 www.newrocktech.com
Figure 2-36 Encryption Configuration Interface
Table 2-29 Encryption Configuration Parameters
Name
Description
Signal encryption
Choose whether to encrypt signaling. By default, this is not selected.
Encryption
method
Set the gateway encryption method, default is 7. The optional parameters as below:
 2:TCP not encrypted
 3: TCP encrypted
 6: UDP not encrypted
 7: UDP not encrypted
 8: Using keyword
 10: RC4
 13: Encrypt13
 14: Encrypt14
 16: Word reverse(263)
 17: Word exchange(263)
 18: Byte reverse(263)
 19: Byte exchange(263)
 20:VOS
Encryption key
You may obtain it from service provider
RTP encryption
Choose whether to encrypt RTP voice pack, the default is 0.
 0: no encryption
 1: entire message
 2: header only
 3: the data body only
T.38 encrypt
Select to encrypt T.38 fax media stream packets. By default, this is not selected.
Session Border
Proxy