Safety Symbols
and
Terms
The following safety terms are used in this manual:
The
WARNING
heading in this manual explains dangers that could result
in personal injury or death.
The
CAUTION
heading in this manual explains hazards that could dam-
age the instrument.
In addition, a
NOTES
heading gives information to the user that may be
beneficial in the use of this instrument.
--
GENERAL WARNINGS AND CAUTIONS
The following general warnings and cautions are applicable to this
instrument:
WARNING
This instrument is intended for use by qualified personnel who
recognize shock hazards or laser hazards and are familiar with safety
precautions required to avoid possible injury. Read the instruction
manual thoroughly before using, to become familiar with the
instrument's operations and capabilities.
WARNING
The American National Safety Institute (ANSI) states that a shock
hazard exists when probes or sensors are exposed to voltage levels
greater then 42VDC or 42V peak
AC.
Do not exceed 42V between any
portion of the Model 2832-C (or any attached detector or probe) and
earth ground or a shock hazard will result.
CAUTION
There are no user serviceable parts inside the Model 2832-C. Work
performed by persons not authorized by Newport may void the
warranty. For instructions on obtaining warranty repair or service
please refer to Section
5
of this manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
