The Model 28324 connects to detectors through a calibration module con-
taining information unique to the detector being used. Calibration modules
are ordered with a detector at the time of purchase and are labeled with the
detector's model number and serial number. Detectors with calibration
modules have a "/CM appended to their model number.
EXAMPLE: 818SL (no calib. module) 818SL/CM (with calibration module)
Scope of
Thii
Manual
Please carefully read this instruction manual before using the Model 28324
DualChannel Power Meter.
Be
especially careful to observe the warnings and
cautions throughout this manual.
If
any operating instructions are not clear.
contact Newport Corporation. This instruction manual contains the necessary
information for operation and maintenance of the Newport Model 28324
Dual-
Channel Power Meter
as
well
as
information for troubleshooting and obtaining
service
if
necessary. This information
is
divided into the following sections:
Section 1
General Information and Functional Description
Section 2 System Operation
Section
3
Principles of Operation
Section
4
Computer Interfacing
Section
5
Remote Command Reference
Section
6
Maintenance, Test, and Troubleshooting
Section
7
Factory Service
Appendix A Syntax and Definitions
Appendix
B
Error Messages
Appendix
C
Status Reporting System
Appendix
D
Sample Programs
Unpacking
and
Inspection
All Model 28324 Dualchannel Power Meters are carefully assembled, tested
and inspected before shipment. Upon receiving this instrument, check for any
obvious signs of physical damage that might have occurred during shipment.
Report any such damage to the shipping agent immediately. Retain the
original packing materials in case reshipment becomes necessary.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
