Newport LBP2 Series User Manual

LBP2 User Guide Document No: 50306-001 Rev G 3/12/2020 Page 11
General Information about LBP2
Introduction to LBP2
The Newport Corporation Laser Beam Analyzer, LBP2, is a low cost, PC-based
product for use in modern multi core advanced Pentium-generation personal
computers running the Windows 7 or Windows 10 operating systems. Some of
these features include:
 High-speed high-resolution false color beam intensity profile displays in both 2D
and 3D
 Operates in Windows 7 (32/64) and Windows 10 (32/64) operating systems
 Numerical beam profile analysis employing advanced patented calibration
algorithms
 Extensive set of ISO quantitative measurements
 All ISO beam width and diameter methods supported
 Enhanced window layout tools to get the most out of the desktop display area
 Pass/fail testing available on most all measured parameters
 Support for USB SPxxx series cameras
 Supports satellite windows on multiple monitors
 Continuous zoom scaling in both 2D and 3D
 Results logging capabilities exportable to Excel
 Industry standard data file formats, HDF5 and CSV
 Configurable Report Generator that allows cut and paste of results, images and
settings from .PDF file types
 Statistical Analysis of all measured parameters
 Both Manual and Auto Aperture for isolating beam data
 Integrated automatic Help linked into this .pdf Users Guide
A complete LBP2 system consists of the following equipment:
 Newport LBP2 software
 USB3 camera with interconnect cables, an External Trigger cable.
 A multi-core Pentium (2.00 GHz or better) style or equivalent PC with Windows 7
or Windows 10 operating system

Advanced Graphics chip set w/256MB of dedicated graphics memory

At least 4 GB RAM

At least 100 MB of hard disk space available

A high-resolution color monitor, 1440x900 minimum recommended

A CD-ROM Drive

Newport LBP2 Series Specifications

General

Brand	Newport
Model	LBP2 Series
Category	Measuring Instruments
Language	English