Newport LBP2 Series - Page 12

LBP2 User Guide Document No: 50306-001 Rev G 3/12/2020 Page 12
Recommended Windows Experience Index:
Component
Desktop
Laptop
Processor
4.4
4.7
Memory (RAM)
4.5
4.8
Graphics
3.5
3.4
Gaming graphics
3.0
3.8
Primary hard disk
5.0
4.0
Optional equipment:
 A printer with appropriate Windows compatible drivers
 LBP2 Beam Sampler or other Laser Beam Attenuator
 USB-TTL Pass/Fail signaling option, order SP90060
Most laser beams require significant amounts of attenuation before application to
the camera sensor. Attenuation requirements vary greatly depending upon
application. Newport offers optional equipment for beam attenuation.
Information for the LBP2 Beam Sampler series is shown below. Consult your
Newport Representative or call Newport's Sales Department for further
information.
Part Number
Description
LBP2-SAM-NIR2
LBP2 BEAM SAMPLER, NIR2
LBP2-SAM-VIS2
LBP2 BEAM SAMPLER, VIS2
LBP2-SAM-UV2
LBP2 BEAM SAMPLER, UV2
LBP2-SAM-BB2
LBP2 BEAM SAMPLER, BROADBAND2
Camera specification:
See appropriate Appendix for information regarding camera specifications.
Important: Your Windows PC must have all of the latest Microsoft
updates and service packs installed to insure successful
operation with LBP2. Install all updates before
installing LBP2.