12
IMPORTANT NOTES
1.4. Safety symbols used in the manual
Danger symbols
Warning of a danger point
This symbol indicates information that must be read and observed.
Non-observance can lead to:
o Risk of injury
o Malfunctions or equipment damage
Warning of dangerous electrical voltage
This symbol precedes information that must be read and observed.
Non-observance can lead to:
o Risk of injury
o Malfunctions or equipment damage
Warning symbol
Warning symbol indicates a possible source of danger.
Failure to follow the warnings may result in injury to the user and/or
damage to the microscope (including nearby objects).
Note symbol
Important additional hint
Accompanying instructions serve to simplify operation and maintenance.
1.5. Safety symbols on the microscope
The following symbols are located on the microscope/accessories and
should always be observed:
The device manufacturer is legally obliged to take back
defective devices for recycling.
EC Declaration of Confirmity
Bresser GmbH has issued a “Declaration of Conformity” in accordance
with applicable guidelines and corresponding standards.
1.6. Sustainability
The protection of our environment is close to our heart.
That is why this manual is printed on 100% recycled paper.
1
To Next Page
Loading...