34 – ENGLISH
PRODUCT MAINTENANCE
10
9 PRODUCT MAINTENANCE
The automation must be subjected to regular maintenance
to keep its safety level constant and guarantee long-lasting
operation; to this aim, HYKE has a manoeuvre counter and
maintenance warning system; refer to the ““Maintenance
notice” function” paragraph.
a
Maintenance must be carried out strictly in
compliance with the safety provisions provided in
this manual and in accordance with the laws and
regulations in force.
To carry out maintenance on the gearmotor:
1. Schedule maintenance interventions within maximum 6
months or after maximum 20.000 manoeuvres from the
previous maintenance intervention
2. disconnect all power supplies, including any back-up
batteries
3. check for any deterioration in the materials making up the
automation, with special emphasis on erosion or oxidation
of the structural parts; replace any parts that are not to
standard
4. check the state of wear of moving parts: pinion, rack and
all gate leaf components; replace any worn parts
5. connect the power supplies again and run all the tests
and checks described in the “Testing” paragraph.
PRODUCT DISPOSAL
11
10 PRODUCT DISPOSAL
l
This product is an integral part of the operator and
must therefore be disposed of with it.
As with the installation, only qualied personnel must dismantle
the product at the end of its life.
This product is composed of different types of materials. Some
of these materials can be recycled; others must be disposed of.
Please enquire about the recycling or disposal systems in place
in your local area for this type of product.
a
WARNING
Some parts of the product may contain polluting or
dangerous substances. If not disposed of correctly,
these substances may have a damaging effect on
the environment and human health.
l
As indicated by the symbol shown
here, this product must not been
disposed of with household
waste. Separate the waste for
disposal and recycling, following
the methods stipulated by local
regulations, or return the product
to the seller when purchasing a
new product.
a
WARNING
Local regulations may impose heavy penalties if
this product is not disposed of in compliance with
the law.