Chapter 14. Capturing Photo Activation Imaging (Galvano Scanner / Time-Series Activation) A1
42
(2) Set the photo activation imaging time settings.
Acq/Stim: Set whether to perform image acquisition or photo activation.
ROIs: Set stimulation groups used for activation.
Interval: Set the time interval of image acquisition or photo activation.
Duration: Set the duration time of image acquisition or photo activation.
When [Loops] is set, duration is automatically determined.
Loops: Set the number of image acquisition or photo activation execution times.
(3) Check the [Save to File] checkbox to acquire images while saving them.
Note: Images are saved in nd2 file format.
Note: We recommend acquiring time series images while saving them.
(4) Click
to read the settings for photo activation simultaneous imaging.
(5) Click the
[Run now] button to start photo activation imaging.
(5)
(3)
(2)
(4)
To Next Page
Loading...
