Nikon A1 User Manual

7
Operation of the Microscope
3
Chapter 3. Operation of the Microscope
3.1 Ti Remote Control Pad (Ti-RCP) Operation
Pressing the icon of the motorized part you want to switch on the touch panel of Ti remote control pad
displays a list of items installed in the each motorized part.
Select an item you want to switch from the list.
Using function buttons
enables necessary microscopy to be called at a time.
Diasco
p
ic illumination control
State at startup
Controlling transmitted
light from the microscope
Objective switch
Condenser switch
Fluorescent filter switch
When is pressed
Optical path switch
Controlling transmitted light
from the remote control pad
Diascopic illumination
voltage
Diascopic illumination
ON/OFF

Nikon A1 Specifications

General

Type	Confocal Microscope
Software	NIS-Elements
Laser Lines	405 nm, 488 nm, 561 nm, 640 nm
Detector	GaAsP PMT detectors
Imaging Modes	Confocal, Spectral, FRAP
Scanning Method	Galvanometer-based scanning
Objectives	Compatible with Nikon CFI objectives
Dimensions	Varies with configuration
Weight	Varies with configuration
Laser	Multiple laser lines available