Nikon A1 User Manual

32
Creating Three-Dimensional Image
10
Chapter 10. Creating Three-Dimensional Image
10.1 Create a three-dimensional image.
(1) Click
to open the Z series image.
(2) Click the
[Show Volume View] button on
the image frame to create a three-dimensional
image.
Note: It takes several to 30 minutes for
creation depending on the image data
size.
10.2 Save the three-dimensional image of a desired angle as an image.
(1) Drag the white frame of the three-dimensional
image with the mouse and adjust it to a
desired angle.
Note: Ctrl + mouse left-click + drag: Cut
cross section
Mouse right-click+ drag: Move
three-dimensional image display
position
Turning mouse scroll wheel: Zoom
(2) Select [Edit] - [Create View Snapshot (8bit
RGB)] from the menu bar to capture a screen.
(3) Select [File] - [Save As] from the menu bar to
save the image in a desired file format (jpg,
tiff, bmp, etc.)

Nikon A1 Specifications

General

Type	Confocal Microscope
Software	NIS-Elements
Laser Lines	405 nm, 488 nm, 561 nm, 640 nm
Detector	GaAsP PMT detectors
Imaging Modes	Confocal, Spectral, FRAP
Scanning Method	Galvanometer-based scanning
Objectives	Compatible with Nikon CFI objectives
Dimensions	Varies with configuration
Weight	Varies with configuration
Laser	Multiple laser lines available