Chapter 15. Image Display Function A1
46
15.8 Adjusting Contrast
Right-click the gray area of the software and select [Visualization Control] - [LUTs] from the displayed menu
to call the LUTs tab.
(1) Clicking the
[Auto Scale All] button
adjusts the contrast of all channels
automatically.
(2) To adjust the contrast for each channel, select
a channel from the list and drag the [Black],
[White], and [Gamma] buttons to adjust the
contrast.
Lookup Table (LUT)
Display of the LUTs varies with the number of channels.
Up to three channels: All channels are displayed
simultaneously.
Vertical display or horizontal display can be selected with
.
Four channels or more
: A single channel is
displayed.
Display channel can be selected from the
pull-down menu.
(3) Clicking the
[Reset LUTs] button returns the display without contrast adjustment.
(4) Clicking the
[Pixel Saturation indication] button displays the saturated image area in red.
Note: Turning on and off the [Live] button (scan ON/OFF) during adjustment minimizes fading.
Auto Scale All
White
Black
Gamma
Pixel Saturation indication
Saturated image area
To Next Page
Loading...
