Nikon A1 - 22.5 Set the optical path. (Optical path setting for the confocal system required for acquiring images)

Chapter 22. Capturing Virtual Filter Images (Spectral Detector) A1
64
22.5 Set the optical path. (Optical path setting for the confocal system required for
acquiring images)
Check the settings.
(1) Click
to open the Optical path window.
(2) Click the
[VF] button to use the spectral detector in the virtual filter mode.
(3) Click the
[Manual] button to set the optical path in the manual mode.
(4) Click the [Grating Settings] tab.
(1)
(3)
(2)
(4)