Nikon A1 - Page 65

Chapter 22. Capturing Virtual Filter Images (Spectral Detector) A1
65
(5) Select a value for [Resolution] (wavelength resolution to be used) from “2.5 nm”, “6 nm”, and “10 nm”. Set
the wavelength band to be acquired by shifting the bar.
(6) Click the
[Detector] tab and make other settings.
(7) Select the laser to be used.
(8) Set the channel detecting range by extending/reducing the
bar.
(9) Select combination of lasers to be used for [1st DM].
(10) If acquiring a transmitted image together with a fluorescent image, click
to bring into the
optical path.
(11) Click the [OK] button to set the optical path.
(7)
(8)
(
5
)
-1
(5)-2
(6)
(11)
(9)
(10)