Chapter 24. Capturing Large Images A1
73
24.3 Determine the large image acquisition area.
(1) Select [Acquire] - [Scan Large Image] from the
menu bar to open the Scan Large Image
window.
(2) Set the scan range.
<When selecting “Number of fields in X and Y”>
Select the number of lines of the scan range.
Set the position on the large image at which the current field of view is to be set in [Fields Placement].
Around the current position: Scanning is performed around the current position.
Current position is at top-left corner: Scanning is performed with the current position set at the top left corner.
<When selecting “Left, top, right and bottom limits”>
Select the top, bottom, right, and left margins.
Selecting “Number of fields in X and Y” Selecting “Left, top, right and bottom limits”
To Next Page
Loading...
