Nikon A1 - 24.4 Perform the advanced settings of large images.

Chapter 24. Capturing Large Images A1
74
24.4 Perform the advanced settings of large images.
(1) Set the Z series options.
- None: Z series is not used.
- Z Series: The values set in the Z tab of the ND Acquisition dialog box are reflected. (See 24.2)
- Max IP: Creates the max intensity projection.
- EDF: Creates an extended depth of focus (EDF) image.
- Z-drive: Selects a Z device to be used.
- Order: Selects a combination with Z.
(2) To close the shutter during stage movement, check the [Close active shutter during stage movement]
checkbox.
(3) Set image overlap correction.
- Overlap: Sets the percentage of image overlap correction.
- No overlap: Stitches images without image overlap correction.
- Stitching via: Selects how the images are stitched.
- Image registration: Enables image overlap correction (position correction) when stitching images.
(4) Select whether or not to use shading correction.
- Automatic postprocessing: Enables automatic post-processing of acquired images.
(5) To acquire multicolor images, set the following options.
- Multichannel capture: Checking this checkbox acquires multicolor images.
- Optical Conf.: Selects the optical configuration to be used.
- Stitch using channel: Selects which wavelength of acquired λ to be used as a guideline when
stitching images.
(1)
(5)
(2)
(4)
(3)