NEUTRAL-03. Select a control from the list and press
the OK button. (If you scroll to the right instead, you
will be able to examine and adjust the control’s settings
before saving it to your camera. If you don’t want to
modify it, simply press the OK button.)
3. You will now be shown the Manage Picture Control >
Save as menu, which lists any Custom Picture Controls
already in your camera (see Figure 3-32, image 3).
Select one of the Unused memory locations and press the
OK button.
4. You’ll now be presented with the Rename screen, just in
case you want to change the name of the Custom Picture
Control. If you don’t want to change the name, simply
press the OK button, and the custom control will be
added to your camera’s Set Picture Control menu. It’s
okay to have multiple controls with exactly the same
name. The camera keeps each control separate in its list
of controls. However, I always rename them to prevent
future confusion. Renaming is fairly easy!
183
To Next Page
Loading...
