Figure 5-14. Time zone screens
2. To set the Time zone, use the Multi Selector to scroll left
or right until your time zone is under the yellow vertical
bar in the center or is marked with a small red dot.
3. Press the OK button to lock in the Time zone.
Date and time – Figure 5-15 shows the two Date and time
configuration screens, as a continuation of Figure 5-13. The
final screen in the series allows you to select the Year, Month,
and Day (Y, M, D), and the Hour, Minute, and Second (H, M,
S).
Here are the steps used to set the Date and time (see
Figure 5-15):
1. Choose Date and time from the Time zone and date
screen and scroll to the right (see Figure 5-15, image 1).
2. Using the Multi Selector, scroll left or right until you’ve
selected the value you want to change. Then scroll up or
down to actually change the value. The top line shown in
Figure 5-15, image 2, includes the Year, Month, and Day
(Y, M, D). The second line includes the Hour, Minute,
and Second (H, M, S).
455
To Next Page
