4 Applications
78 Total Station NPL-322 Instruction Manual
4. Choose a method to define the arc.
P2 can be any point on the tangent line that is to
exit the curve.
5. In the radius (Rad) field, enter a positive value
for a clockwise curve. Enter a negative value for
a counterclockwise curve.
When all factors have been entered, the instrument calculates the curve.
If the curve length (Len) is too large for a circle of the
given radius, it is shortened.
To ... Press ...
switch between display screens
[DSP]
change HT
[HOT]
record points [ENT]
To Next Page
Loading...
