Product code change DCT-4
•
Supply power to JBV-1 Docking station from an external power supply. Higher voltage is needed so that
phone is forced in correct mode during procedure.
•
Connect phone and scan product, read phone information to check communication with phone.
•
Open
Tools
–>
Product Code Change DCT-4 –> Menu
.
•
Provide Tucson Password and PIN code which have been delivered to you by email. Please note that
characters are case sensitive.
•
Do not select the “Flash Product” – option!
RM-721; RM-722
BB Troubleshooting and Manual Tuning Guide
Issue 1 COMPANY CONFIDENTIAL Page 3 – 53
Copyright © 2011 Nokia. All rights reserved.
To Next Page
Loading...
