DeviceNet Specifications
10-13
Part 1089210A04
E 2010 Nordson Corporation
Common Services
Service Code
Implemented for
Service NameClass Level Instance Level
0E
HEX
Yes Yes Get Attribute Single
10
HEX
No Yes Set Attribute Single
05
HEX
No Yes Reset
06
HEX
No Yes Start
07
HEX
No Yes Stop
4B
HEX
No Yes Abort
4C
HEX
No Yes Recover
4E
HEX
No Yes Perform_Diagnostics
S The Coolwave2 enters the “Nordson Off State” as a result of S−Device
Supervisor commands “Reset”, “Stop” or “Abort”.
S The S−Device Supervisor “Start” command transitions to the S−Device
“Executing” state which allows the Nordson commands: “On, Ready,
Standby and Stop” via the I/O data.
S The S−Device Supervisor command “Perform_Diagnostics” has no
supported behavior.
To Next Page
Loading...