Installation
3-16
Part 1089210A04
E 2010 Nordson Corporation
Switching Pressure Ports
Use this procedure to switch the connection from one pressure port to the
other:
1. Remove the lamphead cover.
2. Remove the barb fitting and the tube from the pressure port.
3. Feed the tube through the lamphead and install the barbed fitting and
tube in the other pressure port.
Top
Pressure
Port
Hose
Barbed
Fitting
Bottom
Pressure
Port
External Blower
External Blower
Internal Blower
Front
Pressure
Port
Figure 3-8 Pressure Port Connections
To Next Page
Loading...