Nordson CoolWave 2 - Light Output Settings

Specifications
8-2
Part 1089210A04
E 2010 Nordson Corporation
Light Output Settings
Nordson CW2 UV Output
Remote Input
40
60
80
100
4 mA 8 mA 12 mA 16 mA 20 mA
2 V 4 V 8 V6 V 10 V
Remote Input  mA/VDC
% of UV Light Output
40
60
80
100
0 4 mA 8 mA 12 mA 16 mA 20 mA
0 2 V 4 V 8 V6 V 10 V
Figure 8-1 Light Output Settings
Master/Remote Power Setting Examples
If the Master Unit is set at and the Remote Unit is set at The Remote Unit will run at
100% 100% 100% of 100%
100% 75% 75% of 100%
50% 75% 75% of 50%
75% 50% 50% of 75%
NOTE: The standard setting is Master Unit 100%, Remote unit 100%.