Maintenance
5-3
Part 1089210A04
E 2010 Nordson Corporation
30 Amp Fuses
10 Amp Fuses
Figure 5-2 Power Supply Fuses
Power Supply Cooling Fan Cleaning
1. Turn off the main electrical disconnect. Follow all relevant
OSHA-established lockout procedures or local codes as appropriate.
2. Locate the cooling fan on the power supply. It is located on the front
side of the power supply.
3. Make sure the safety cover is clean and free of any debris.
4. Examine fan blades for contamination. Clean or replace if necessary.
To Next Page
Loading...