Installation
3-2
Part 1089210A04
E 2010 Nordson Corporation
S Leave at least six inches of ventilation clearance on all four sides of the
power supply.
S If the power supply is mounted in an enclosure, there must be free and
unobstructed ventilation from top to bottom and side to side within the
enclosure.
753.00 [29.67]
790.50 [31.12]
257.00 [10.118]
453.50 [17.854]
25.40 [1.00]
703.00 [27.70]
25.25 [.99] 158.19 [6.23]
ø28.50 [ø1.12]
NORDSON CORPORATION
555 JACKSON STREET
AMHERST, OH 44001, USA
Voltage Frequency KVA
Part No.Model Serial No.
P
0
6
4
2
8
0
6
4
2
NET
RATE
2
5
1
P
REMOTE
LOCAL
MAGNETRON
AIR PRESSURE
SYSTEM OFF
SYSTEM ON
SET−SAVE
STANDBY
POWER
SETPOINT
SETTING
POWER
NETWORK
LAMP HEAD
MPS2−410
143.10
(5.64)
143.10
(5.64)
152 mm
(6 in.)
Required Ventilation Clearance
(All Four Sides)
Sized for
3/4 in. Conduit
Figure 3-1 Power Supply Dimensions and Required Ventilation Clearance
To Next Page
Loading...