Troubleshooting
4-6
Part 1105779-04
E 2014 Nordson Corporation
Refer to
Page
DescriptionMessage TextCode
2108 Speed calculated greater
than maximum
The speed of the reciprocator is greater than
the maximum value allowed.
4-28
2113 Reciprocator not in ready
state for Color Change
The reciprocator is not in the proper position
for color change.
4-28
300x Watchdog
3100 Positioner Watchdog fault The remote Ethernet device did not respond
with a watchdog signal in 1 second.
4-20
3200 Reciprocator Watchdog fault The remote Ethernet device did not respond
with a watchdog signal in 1 second.
4-28
410x Color Change
4109 Clean cycle aborted arch
clean operation − waiting on
park release
Clean cycle detected an abort − waiting for
user to press park to release.
4-20
4110 Clean cycle aborted by user
action − park release
detected
Clean cycle aborted by user − part release
was detected.
4-20
4111 Clean cycle aborted detected
machine lockout/watchdog
A machine malfunction aborted the cleaning
operation.
4-20
To Next Page
Loading...
