Using the Menus
5-34
Part 1124631_01
E 2015 Nordson Corporation
System Setup Screens (contd)
Item Menu Action
Units/
Scale
3
a
b
c
d
10
aTaptheUnits/Scale button
on the System Settings
screen.
b Selecthowyouwantto
program the patterns:
S ms (milliseconds)
S mm (millimeter)
S inch (in.)
c For Encoder icon status:
If you don’t use an encoder, scaling
can still be used to allow patterns to
be programmed in distance, but the
scaling is only accurate at one line
speed.
When you use an optional encoder,
scaling ensures that the line speed
displays correctly and that
programmed pattern measurement
is accurate at all line speeds.
!
encoder detected and
license available to
enable encoder
operation.
encoder not detected.
encoder detected,
license missing to enable
encoder operation.
Continued...
To Next Page
Loading...
