Nortek Signature Series User Manual

Integrator's Guide34
© 2017 Nortek AS
5.20 SETDEFAULT
Reload default settings
Argument
Description
ALL
Restore all settings below except USER and INST to default values.
AVG
Restore AVG default.
INST
Restore INST default.
TMAVG
Restore TMAVG default.
PLAN
Restore PLAN default.
BURST
Restore BURST default.
PTP
Restore PTP default.
BT
Restore BT default.
USER
Restore USER default.
TMBURST
Restore TMBURST default.
TMALTI
Restore TMALTI default.
DVL
Restore DVL default.
5.21 SAVE
Save current settings for next measurement. At least one argument must be specified for the
SAVE command.
Argument
Description
ALL
Save all settings except INST and USER settings.
AVG
Save AVG parameters.
INST
Save INST parameters.
TMAVG
Save Telemetry AVG parameters.
PLAN
Save PLAN parameters.
BURST
Save BURST setting parameters.
PTP
Save PTP parameters.
TMBT
Save Telemetry BT parameters.
USER
Save USER parameters.
TMBURST
Save TMBURST setting parameters.
TMALTI
Save TMALTI Profile parameters.
DVL
Save DVL setting parameters.

Nortek Signature Series Specifications

General

Type	Acoustic Doppler Current Profiler (ADCP)
Operating Temperature	-5°C to +45°C
Storage Temperature	-20°C to +60°C
Temperature Sensor	Integrated
Pressure Sensor	Integrated
Compass and Tilt Sensor	Integrated
Data Storage	Internal memory
Communication Interfaces	Ethernet, RS-232
Depth Rating	Up to 6000 meters (depending on model)
Data Output	ASCII, binary
Beam Angle	Varies by model
Velocity Accuracy	±0.5% of measured velocity ±1 mm/s