EasyManuals Logo

Nortek Signature Series User Manual

Nortek Signature Series
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Integrator's Guide36
© 2017 Nortek AS
5.24 POWERDOWN
Power down the instrument to set it in sleep mode.
5.25 ERASE
Argument
Description
CODE
Code should be 9999
Erase all files on the recorder.
5.26 FORMAT
Argument
Description
CODE
Code should be 9999
Format the recorder. Note that this can take minutes depending on the recorder size.
5.27 SECREBOOT
Argument
Description
CODE
Code should be 9999
Reboots the SEC (Interface processor). This command makes it possible to reboot the SEC without
going via the web interface.
5.28 LISTFILES
Lists the files stored on the Instrument recorder.
Argument
Description
OPT
OPT=”la” lists extended information.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nortek Signature Series and is the answer not in the manual?

Nortek Signature Series Specifications

General IconGeneral
TypeAcoustic Doppler Current Profiler (ADCP)
Operating Temperature-5°C to +45°C
Storage Temperature-20°C to +60°C
Temperature SensorIntegrated
Pressure SensorIntegrated
Compass and Tilt SensorIntegrated
Data StorageInternal memory
Communication InterfacesEthernet, RS-232
Depth RatingUp to 6000 meters (depending on model)
Data OutputASCII, binary
Beam AngleVaries by model
Velocity Accuracy±0.5% of measured velocity ±1 mm/s

Related product manuals