EasyManua.ls Logo

NOVA BIOMEDICAL StatStrip 55848 - 1.10 Installing the StatStrip Glucose Hospital Meter

NOVA BIOMEDICAL StatStrip 55848
122 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-17
1. Intro.
Instructions for Use Manual 1 Introduction
1.9.5 Multi-screen Menus
When a menu or a list is too large to be fully
displayed on the LCD screen, or a menu item is one
of many in a list, a Page Up (lower left side) and a
Page Down (lower right side) soft keys display to
navigate forward and backward amongst the screens.
1.10 Installing the StatStrip Glucose Hospital Meter System
Install a rechargeable Li battery. The Battery comes with a
half charge thus the meter can be operated immediately. To
fully charge the battery, place the meter onto the Charging
Station. The Charging Station must be plugged into a 120
Volt AC outlet. The meter needs to be charged until the
green light on the charging station lights up. At the same
time, place the spare rechargeable battery into its place in
the Charging Station.
A spare battery can be stored in a charging position in the
Charging Station. The Charging Station recharges the bat-
tery of the meter when the meter is placed into the station.
Indicator lights on the station provide feedback as to whether
the meter battery is charging or fully charged.
The station must remain plugged into a wall outlet for power.
The station is designed to reside on a desk or counter top.
StatStrip Glu IFU 1.86 PN55848E EN 510K.indd 17 9/13/18 8:29 AM

Table of Contents

Related product manuals