1-22
StatStrip Glucose Hospital Meter
1.12.1 Naming the Meter
The meter can be given a name with respect to where it will
be used: i.e., Your Location.
1. From the Patient Test screen, press the Menu then
the Admin soft button.
2. The Admin screen displays. Press the Meter Name
soft key.
3. The Enter Meter Name screen displays. To add or
change the name, enter the name onto the soft
keypad on the screen.
NOTE: Maximum number of characters is 10.
4. When done, press the Accept soft key. The meter
name appears on the Meter Name header of the
screen.
1.12.2 Setting the Time/Date
Once you have logged in, the meter's time and date can
be set.
1. From the Patient Test screen, press the Menu then
the Admin soft button.
2. The Admin screen displays. Press the Set Time soft
key.
3. The Set Time screen displays. To change the hour,
press the drop down arrow. Then press the up/down
scroll arrow to the current hour. Do the same for
the minutes.
4. Do the same for the Month, Day, and Year.
5. If Date and Time are now correct, press the Accept
soft button.
StatStrip Glu IFU 1.86 PN55848E EN 510K.indd 22 9/13/18 8:29 AM
To Next Page
Loading...
