4-1
4. Station
Instructions for Use Manual 4 Docking/Charging Station
4 Docking/Charging Station
When the meter is not in use, place it into the Docking/
Charging Station. This will enable the meter to stay fully
charged. The Docking/Charging Station is connected to
a power source and to the computer network as follows:
1. Plugthexedpowercordfromthepowersupply
into the back of the Charging Station.
2. Plug the 2-prong plug into a wall outlet.
3. Place the meter and/or spare battery into the Charg-
ing Station.
StatStrip Glu IFU 1.86 PN55848E EN 510K.indd 1 9/13/18 8:29 AM