1-19
1. Intro.
Instructions for Use Manual 1 Introduction
Messages or Alerts on the Home screen
• Press OK to begin testing
• Memory Full
Dock Meter Immediately
• Battery Low
Charge/Replace Battery
• QC Due: xx:xx hrs.
• Download Due: xx:xx hrs
• LOCKED
Perform QC before Patient Testing
• QC Required
• Linearity Required
• Testing Not Allowed
Assign Unit
• Dock Required
• Please return meter
to dock for transfer
• Memory Low
Need to Dock Soon
• LOCKED
With a message
1.11 Operator Login
After initial power up, an operator can login to have access
to all the assigned functions of the meter. To login, proceed
as follows:
1. From the Home screen, press the Login soft key at
the bottom middle of the screen.
2. The Enter Operator ID screen displays.
a. To enter alphanumeric ID's, press the ABC soft
key on the touchscreen keypad. An alphanu-
meric keypad will display.
b. To return to numeric keypad, press the 0-9 soft
key.
c. To use the barcode scanner, press the Scan soft
key on the Enter Operator ID screen.
StatStrip Glu IFU 1.86 PN55848E EN 510K.indd 19 9/13/18 8:29 AM
To Next Page
Loading...
