PN7462 family Quick Start Guide - Development Kit
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.6 — 14 May 2018
319816
(1)
(2)
(1) PNEV7462B V2.1 (red marked are the default settings)
(2) PNEV7462B V2.2 (red marked are the default settings)
Fig 17. Default supply connection of the PN7462AU using all blocks
To change settings, the corresponding shortcut resistors (marked in Fig 17) needs to be
placed to the corresponding position (default settings are marked in green):
Table 2. Supply options
Note:
If PVDD is externally supplied, the Jumper 42 (PVDD_OUT) needs to be set. By setting
this Jumper the PVDD_OUT is shorted to GND and the PN7462AU turns off the PVDD
LDO.
To Next Page
Loading...
