NXP Semiconductors QorIQ T1040 - 4.4.2 Other boot source settings; 4.4.3 Switch detailed description

DIP Switch
binary
value
1 2 3 4 5 6 7 8
SW1 0001 0011 ON ON ON OFF ON ON OFF OFF
SW2 1011 1011 OFF ON OFF OFF OFF ON OFF OFF
SW3 1110 0001 OFF OFF OFF ON ON ON ON OFF
4.4.2 Other boot source settings
This section defines the settings for NAND boot, SPI boot SW, and SD boot.
NAND boot settings:
DIP Switch
binary
value
1 2 3 4 5 6 7 8
SW1 1000 1000 OFF ON ON ON OFF ON ON ON
SW2 0011 1011 ON ON OFF OFF OFF ON OFF OFF
SW3 1111 0001 OFF OFF OFF OFF ON ON ON OFF
SPI boot SW settings:
DIP Switch
binary
value
1 2 3 4 5 6 7 8
SW1 0010 0010 ON ON OFF ON ON ON OFF ON
SW2 1011 1011 OFF ON OFF OFF OFF ON OFF OFF
SW3 1110 0001 OFF OFF OFF ON ON ON ON OFF
SD boot settings:
DIP Switch
binary
value
1 2 3 4 5 6 7 8
SW1 0010 0000 ON ON OFF ON ON ON ON ON
SW2 0011 1011 ON ON OFF OFF OFF ON OFF OFF
SW3 1110 0001 OFF OFF OFF ON ON ON ON OFF
4.4.3 Switch detailed description
Chapter 4 Software configuration
QorIQ T1040 Reference Design Board User Guide, Rev. 0, 06/2015
Freescale Semiconductor, Inc. 59