Nytech DS-8210 Introduction
8 - English
Getting Started
The camera functions with a rechargeable Lithium-Ion (BYD DM6331)
battery. On delivery, the battery is not charged. Please charge the battery
before first use of the camera.
Charging the Battery
Insert the rechargeable battery in the charging cradle Nytech AB-4330Y so
that the contacts [+] and [-] correspond to the rechargeable battery and
charging cradle markings. Next connect the power adapter to the charging
cradle and plug the power adapter to a wall outlet.
The status indicator of the charging cradle will light yellow whilst the battery
is charging. When the charging process is completed, the status indicator
will light green. You can then insert the rechargeable battery into the
Nytech DS-8210. Depending on the charge level, the charging cycle can
take up to 4 hours.
To operate the camera, only use the
BYD DM6331 rechargeable Lithium-
Ion battery.
Remove the rechargeable battery
from the camera when the device is
not to be used for a long time.
During charging, the rechargeable
battery and charging device will
become warm. This is not a
malfunction.
If, after inserting the rechargeable
battery, the indicator remains green,
this means the rechargeable battery
is already charged or it is not
correctly inserted. In this case, check
the polarity.
To Next Page
Loading...
Need help?
General
