Nytech DS-8210 User Manual

Nytech DS-8210 Introduction
12 - English
The Nytech DS-8210 powers itself off if the LCD screen has been switched
off for longer than one minute. Then press the Power button [1] to switch
the camera on again.
The energy-saving function is not enabled when:
- the camera is connected via a USB cable to a computer or printer
- a slideshow is being played back
- a video or audio file is being recorded
- a video or audio file is being played
Toggling Between Recording and Playback Mode
The Nytech DS-8210 is ready to record videos or audio files in Recording
mode. In Playback mode the recorded files can be seen on the display [12].
- Press the Play button [5] to toggle between Recording and Playback
mode.
LCD Display
The LCD display [12] of your Nytech DS-8210 is used to configure the
shooting parameters, to check and adjust the camera settings and to
display your captured images. In Recording mode, on-screen icons inform
you of the current camera settings, while in Playback mode information on
the recorded image is displayed.

Nytech DS-8210 Specifications

General

Brand	Nytech
Model	DS-8210
Category	Digital Camera
Language	English