Nytech DS-8210 User Manual

Nytech DS-8210 Capturing Pictures
18 - English
Using the Zoom Function
Your Nytech DS-8210 features a combination of optical and digital zoom
allowing you to zoom in on distant subjects or to zoom out for wide-angle
shots.
The optical zoom adjusts the camera lens mechanically. The digital zoom
enlarges or reduces the picture via software control.
In Recording mode, select the desired subject area by pressing the zoom
buttons.
- Press [ W ] to reduce the zoom factor and obtain a wide-angle shot.
- Press [ T ] to increase the zoom factor and obtain a telephoto shot.
When pressing any of the zoom buttons the zoom bar (see page 14 –
item 4) will appear on the display [12].
When the maximum optical zoom factor has been reached, zooming will
pause for a moment. Press the [ T ] button again. The camera switches to
digital zoom mode and will continue zooming in.
Optical zoom area Digital zoom area
Zoom mark
Before you can use the digital zoom, you must enable it (see
page 30, Digital Zoom).
Telephoto Wide-angle
Figure: Zoom bar [4] on display [12]
i

Nytech DS-8210 Specifications

General

Brand	Nytech
Model	DS-8210
Category	Digital Camera
Language	English