Nytech DS-8210 User Manual

Nytech DS-8210 Appendix
English - 61
Appendix
Power Indicator Status
The power indicator [2] of your Nytech DS-8210 informs you of the camera
status. Depending on its colour and/or blinking frequency it has the
following meanings:
Steady green, display on:
The camera is ready in Record mode.
or
The autofocus was able to focus the subject. The settings for aperture
and shutter speed will prevail as long as the shutter button is kept
pressed down.
Steady green, display off:
The camera has been connected to the TV set via the AV cable or it has
been connected to a computer via the USB cable.
Blinking green, display off:
The camera is in power-saving mode (press any button to exit the
power-saving mode).
Blinking green, display on:
The autofocus was unable to focus the image (change the camera
position or the zoom factor and retry the autofocus again).
or
After capturing an image, the camera isn’t ready yet for the next picture
(for instance when using the flash). Wait until the power indicator lights
steady green.
or
The camera is set to video or voice recording mode or the burst
photography mode has been enabled.

Nytech DS-8210 Specifications

General

Brand	Nytech
Model	DS-8210
Category	Digital Camera
Language	English